 |
 |
36" Television Monitor
DVD/VCR combo unit with remote
Overhead projector on cart
Pull-down projection screen
Chalkboard
The power for each device must be turned on separately. The TV's power button is centered below the screen. The power button for the DVD/VCR is located in the lower left corner of the combo unit. Both must be turned on.
The volume is adjusted using the volume + and - buttons on the TV monitor.
Once the equipment is powered up, insert the videotape into the VCR portion of the combo unit. Use the buttons on the face of the unit for: STOP, PLAY, Fast-Forward (FF), and Rewind (REW). To remove the videotape, press the VCR EJECT button located under the tape door. NOTE: If there is no picture, make sure the TV is on channel AV1 (below channel 2).
Once the equipment is powered up, use the OPEN/CLOSE button located under the disc tray on the left side of the combo unit and insert the DVD into the disc tray. Use the buttons on the face of the unit for: STOP, PLAY, PAUSE, Next (FF), and Previous (REW). Additional functions are available using the remote control provided. NOTE: If there is no picture, make sure the TV is on channel AV1 (below channel 2).
To turn off the equipment, simply press the same power buttons that you used to power up the equipment.