Crestron Touch Panel Interface
Ceiling-mounted LCD projector
Windows computer
Document camera (click here for more info)
Blu-ray/VCR combo unit
Ability to connect a presenter's laptop
Ability to connect other external devices (via HDMI or composite audio/video)
Internet and network access
Pull-down projection screen
Chalkboard x2


The equipment is controlled using a Crestron Color Touch Panel Interface.

If the touch panel's screen is black, touch the screen to wake the display. When the Canisius Logo Screen appears, tap the screen and enter the required Access Code. (Authorized users can request the Access Code from the Help Desk by calling x2299).

After successfully entering the Access Code, the equipment will power-up and the Crestron will display the message "Please Wait...LCD Projector Warming-up." Once the projector is ready, the Crestron will display the Main Menu, further identifying the function of the hard-buttons.


Each source page (COMPUTER, LAPTOP, DOCUMENT CAMERA, BLU-RAY, VCR & AUX) has a Projector Standby button located in the lower left corner of the screen. Pressing this button once will place the projector in standby or pic-mute mode. While this mode is active, the button will flash. Simply press the button again to take the projector out of standby mode.


Each source page (COMPUTER, LAPTOP, DOCUMENT CAMERA, BLU-RAY, VCR & AUX) has a volume control section located on the right side of the screen. Volume up, down, and mute controls are provided. NOTE: Computers have their own volume controls which may need to be adjusted separately.


Press the POWER button on the resident computer to turn it on (see Picture 2 above). OM 408 is equipped with a rack mounted HP computer. USB ports are located next to the computer's power button.

Once the computer has been powered up, press the COMPUTER button on the Crestron to display the appropriate touch-screen controls.


The Doc Cam’s power and lights must be turned on manually using the controls located on the camera itself. Click here for more information regarding the document camera found in this classroom.

Once the camera's power is on, press the DOC CAM button on the Crestron to display the appropriate touch-screen controls.


Simply insert your disc (DVD or Blu-ray) into the Blu-ray/VCR combo unit and press the BLU-RAY button on the Crestron to display the appropriate touch-screen controls. Touch-buttons are provided which allow you to control the Blu-ray player from the Crestron. The only time you ever touch the combo unit itself is to insert or eject your disc.


Simply insert your tape into the Blu-ray/VCR combo unit and press the VCR button on the Crestron to display the appropriate touch-screen controls. Touch-buttons are provided which allow you to control the VCR from the Crestron. The only time you ever touch the combo unit itself is to insert or eject your tape.


The cables needed for connecting a laptop computer are found on the instructor’s lectern (under the hatch located top-right). Plug the VGA cable into your laptop's VGA port and tighten the thumbscrews to ensure a good connection. If you require access to the Internet or your campus-network resources, plug the Ethernet cable into your laptop's network jack. To play computer-audio, you will need to plug the audio cable into your laptop's headphone jack. Be sure the laptop's volume is not too low or muted.

For best results:

1. Power-up the equipment as described above.
2. Connect the required cables to your laptop as described above.
3. Plug in your laptop's AC power adaptor.
4. Press the LAPTOP button on the Crestron.
5. Turn on your laptop's power.


To display images from a video camera or other external device, use the External Audio/Video cables located on the instructor's lectern (under the hatch); HDMI and composite audio/video cables are provided.

After connecting your device with the appropriate cables, press the AUX button on the Crestron to display the appropriate touch-screen controls. Touch-buttons are provided which allow you to select your external device for video/audio playback in the room.

NOTE: Devices that have a headphone jack can be connected to the audio cable on the laptop VGA cable. You will need to select the LAPTOP button on the Crestron in order to hear your audio in the room.


Press the SHUTDOWN button on the Crestron to display the appropriate touch-screen controls. Press the green "Yes" button to proceed with shutdown or the red "No" button to cancel. Be sure to remove any media from the equipment before shutting it down.